Safety valve 250bar for compressors
Safety valves are an assembly that is mandatory on every breathing air compressor and high pressure compressor. The set pressure of the valve can be adjusted to the final pressure by means of spring force. High-pressure compressors, if not shut off, will continue to generate pressure until some component on the compressor breaks or the drive motor is overloaded. For this reason, breathing air compressors are equipped with two safety devices. The electrical limit switch and the safety valve. Some compressors also have additional safety valves in the piping at each compressor stage. Safety valves are available for the two most used pressure stages 200bar ( 232bar ) and 300bar ( 330bar ) in our online store. In addition to the safety valve, the pressure gauge for displaying the pressure of the compressed gas is an important piece of equipment for high-pressure compressors and breathing air compressors.
Â
Technical data safety valve 250bar
-connection thread of the safety valve 1/8" NPT 27 thread below
-max. volume flow approx. 265 L/min
-Safety valve 250bar for air and non-aggressive gases
-Spare part for e.g. Coltri Sub breathing air compressors MCH6, MCH13 and MCH16
-Safety valve can also be used for compressors from Bauer, Lenhardt & Wagner, Dräger or Auer
-Deviations in the design can lead to changed appearance.
| Shipping weight: |
0,10 kg
|
| Item weight: |
0,10 kg
|
Product safety information
Manufacturer information:
Aerotecnica Coltri
Â
, ,Â
https://www.coltri-kompressoren.de/
