Oxygen - Tec - Booster
Boosters are small compressors driven by compressed air, but they are not self-priming. Boosters always require a certain inlet pressure on the input side, which can be up to a minimum of approx. 15 bar for this model. With this low inlet pressure, high outlet pressures can still be achieved. Of course, due to the pressure-transmission ratio, an output pressure of 225 bar is no longer possible or would require such a high drive air consumption that it is absolutely unprofitable. The booster can be used for all gases, but care must be taken that the oxygen booster is not contaminated with oil or grease when compressing other gases.
Â
Technical data of the NRC booster
-Air drive 4-10bar
-Medium for driving the booster: filtered, oil-free compressed air
-Connection thread G1/4" female thread (suction side, pressure side)
Connection thread air drive NW 7.2 plug-in coupling
-Conversion ratio: 1:27
-Gas inlet pressure min. 15bar pA
-Gas inlet pressure max. 200bar pA
-max. permissible outlet pressure 300bar pB
-stroke volume approx. 13cm³
-Delivery capacity 0.013l per stroke
-Compressed air consumption 6 litres per stroke at 6bar
-permissible media inert gases and oxygen
-permissible operating temperature + 5°C to max. + 45°C
-permissible storage and transport temperature + 5°C to max. + 60°C
-Dimensions of the booster: 340x85mm Height 124mm
-Total weight 3.5kg
-Booster is delivered ready for connection
-Made in Germany
| Shipping weight: |
7,00 kg
|
| Item weight: |
5,00 kg
|
Product safety information
Manufacturer information:
NRC
Â
, ,Â